Welcome to your YOLO Outdoor Folding Wagon (Model HRF742). These folding wagon instructions walk you through every stage of use — unpacking, setup, opening, locking, loading, folding, and storage — so you can switch between cargo mode and seating mode in minutes. Follow the numbered steps below and refer to the images as you go.
Folding Wagon Instructions: Setup Steps for Model HRF742
Before you begin, unpack the wagon on a clean, flat surface and keep the collapsed unit upright. No tools are needed for this folding wagon setup. If a joint feels stiff on first use, that is normal for a new wagon — move gently and the frame will loosen as it is opened and folded a few times.
Step 1: Take Out the Product
Carefully remove your folded wagon from its packaging. Use the padded carrying straps to lift it — they are designed for safe handling while the wagon is collapsed. Set it on the ground with the handle facing up and give yourself room on all sides.
Step 2: Undo the Handle Velcro
Locate the Velcro strap that wraps around the handle and carrying straps, then undo it so the handle is free. Keep the strap attached to the frame — you will use it again when you fold the wagon for storage.
Step 3: Gently Unfold the Frame
Begin to gently unfold the main frame of the wagon. Hold the top edges of the fabric liner on both sides and pull outward slowly, letting the frame open in a controlled motion. Do not force any joint — the frame is designed to open smoothly.
Step 4: Fully Expand and Lock the Frame
Push down firmly on the frame sides until the wagon is fully expanded. The locking mechanism will engage and the frame will hold its shape once it is locked into position. If the frame does not click into place, check that both sides are aligned and press down again. If a joint still will not lock, check the product label or confirm with YOLO Outdoor before use.
Step 5: Open the Backrest Zipper (Seating Mode Only)
If your model includes a backrest for seating mode, locate and open the zipper on the backrest fabric. This step is specific to convertible models, so you can skip it if you are using the wagon purely for cargo.
Step 6: Insert the Cushion or Floor Mat
Place the provided cushion or floor mat flat into the bottom of the wagon bed so it lies evenly across the base. Smooth out any folds so the floor is level before you start loading.
Step 7: Cargo Mode Ready
Your wagon is now assembled and locked, ready to carry cargo. For loading guidance: place heavier items first, near the center and bottom of the bed, and keep the load balanced from side to side. Confirm the frame is locked before adding weight, and keep the load inside the bed.
Folding Wagon Instructions: Converting to Seating Mode
With cargo mode complete, the HRF742 can be converted into a comfortable seating trailer in three quick steps. The front panel unzips so the wagon can also be used for seating or as a low table. Continue with the folding wagon instructions below to switch modes.
Step 8: Undo the Front Cover Velcro
To convert to seating mode, locate and undo the Velcro fasteners on both sides of the front fabric cover. The cover stays attached to the wagon, so there are no loose parts to keep track of.
Step 9: Open the Front Cover Zippers
Open the zippers located on both sides of the front fabric cover. This releases the front panel so it can fold down. Pull the zippers smoothly and keep the fabric clear of the zipper track as you go.
Step 10: Seating Mode Ready
With the front panel folded down flat, your wagon is now transformed into a convenient seating trailer. To return to cargo mode, zip the front panel back up and re-attach the Velcro fasteners.
Folding the Wagon for Storage
Storing the wagon is simple: reverse the folding wagon instructions you followed for setup. First, empty the wagon completely. Undo any Velcro straps and zippers that were opened, then release the locking mechanism on the frame — if you are unsure where the release points are, check the product label or confirm with YOLO Outdoor. Fold the frame together gently, collapse the fabric inward, re-wrap the handle with the Velcro strap, and lift it by the carrying straps. Keep the folded wagon in a dry place out of direct sunlight and away from sharp objects that could puncture the fabric.
Loading Guidance and Safe-Use Checks
These folding wagon instructions finish with a few quick checks to make before each use. Confirm the frame is fully open and the locking mechanism is engaged on both sides. Do a quick wheel check: spin each wheel to make sure nothing is tangled around the axle and that the wheels roll freely. If your model has an adjustable handle, set it to a comfortable height before you start pulling. Keep the load inside the bed and balanced — do not stack items above the fabric line, and never exceed the load capacity shown on the product label.
Need More Help?
We hope these folding wagon instructions help you get the most from your YOLO Outdoor Model HRF742. Browse the YOLO Outdoor product range for other folding wagons and accessories, explore our OEM and ODM outdoor gear customization services for business customers, or contact us if you have any questions about your wagon. For safety-related guidance on general-use products, review the CPSC general-use product testing guidance, and check the CPSC recalls database for current product safety notices.
English 
French